Shaanxi Automobile Delonghi X3000, drive type 6X4 With a wheelbase of 3975+1400mm,

Shaanxi Auto Delong X3000 6*4 Truck

Vehicle parameters

Body size: 6850mm×2550mm×3650mm

Vehicle weight: 8.8 tons

Wheelbase: 3175+1400mm

Maximum speed: 84KM/h

Power system

Engine: Common Weichai WP12.460E50 engine, 11.596L displacement, National V emission standard, maximum output power 338kw (460 horsepower), torque 2110N・m.

Gearbox: Matched with Fast 12JSD180TA+QH50 spline power take-off gearbox, retarder optional.

Chassis system

Rear axle: 13t MAN single-stage axle, speed ratio 3.7.

Frame: Height (940-850)×270 (single 8) mm.

Suspension: Leaf spring adopts 2/3 (front 2 rear 3) less leaf spring design.

Tires: 12R22.5 vacuum tires.

Cab configuration

Cab type: Extended high-top cab, equipped with four-point airbag suspension.

Seat: The main driver is equipped with an airbag shock-absorbing seat, and the adjustment button is on the left.

Interior: Gray + beige design, the center console layout is simple.

Maintenance method of Shaanxi Auto Delong X3000 6*4 truck

Regular maintenance: perform maintenance according to the mileage or time interval specified in the vehicle manual, replace regular parts such as engine oil, oil filter, air filter, fuel filter, check the level and quality of brake fluid, coolant, steering oil, etc., to ensure the normal operation of each system.

Chassis maintenance: check whether the connecting bolts of various chassis components are loose, the wear of drive shafts, half shafts, ball heads and other components, replenish or replace grease in time, check the status of suspension components such as leaf springs and shock absorbers, and ensure the stability and reliability of the chassis.

Tire maintenance: check tire pressure regularly, keep tire pressure normal, check tire wear, rotate or replace tires in time, clean stones and debris in tire treads, etc., to avoid abnormal wear or damage of tires.

Electrical system maintenance: check the battery power and electrolyte level, clean the battery terminals, ensure the normal power supply of the electrical system, check the working conditions of electrical equipment such as lights, horns, wipers, etc., and replace damaged bulbs, motors and other components in time.

Engine maintenance: Check the tension of the engine belt, adjust or replace the belt in time, clean the engine radiator regularly to ensure good engine heat dissipation, pay attention to the engine's running sound and temperature, and troubleshoot any abnormalities in time.